• Home
  • Guides
  • About
  • Blog
  • Shop
Free CCNA Study Guide Free CCNA Study Guide

Free CCNA Study Guides

  • Home
  • Study Guides
    • CCNA Routing & Switching 200-125
    • ICND1 100-105
    • ICND2 200-105
  • Blog
  • Shop
  • Home
  • Guides
  • About
  • Blog
  • Shop

Study Guides

Home/Study Guides
­
Study Guidesfreeccna2013-10-03T18:49:59-05:00
  • CCNA Routing & Switching 200-125
    • Chapter 1 – Understanding Networks and their Building Blocks
      • 1-1 Introduction to Networks
      • 1-2 Networking Types
      • 1-3 OSI Reference Model
      • 1-4 TCP/IP Model
      • 1-5 Ethernet Technologies and Cabling
      • 1-6 Cisco 3 Layer Model
      • 1-7 Summary
    • Chapter 2 – IP Addressing and Subnets
      • 2-1 IP Addresses – Composition, Types and Classes
      • 2-2 Private and Public IP addresses
      • 2-3 Subnetting
      • 2-4 Variable Length Subnet Masks (VLSM)
      • 2-5 Route Summarization
      • 2-6 Troubleshooting IP Addressing
    • Chapter 3 Introduction to Cisco Routers, Switches and IOS
      • 3-1 Introduction to Cisco Routers, Switches, IOS & the Boot Process
      • 3-2 Using the Command-Line Interface (CLI)
      • 3-3 Basic Configuration of Router and Switches
      • 3-4 Configuring Router Interfaces
      • 3-5 Gathering Information and Verifying Configuration
      • 3-6 Configuring DNS & DHCP
      • 3-7 Saving, Erasing, Restoring and Backing up Configuration & IOS File
      • 3-8 Password Recovery on a Cisco Router
      • 3-9 Cisco Discovery Protocol (CDP)
      • 3-10 Using Telnet on IOS
      • 3-11 CCNA Lab #1
    • Chapter 4 Introduction to IP Routing
      • 4-1 Understanding IP Routing
      • 4-2 Static, Default and Dynamic Routing
      • 4-3 Administrative Distance and Routing Metrics
      • 4-4 Classes of Routing Protocols
      • 4-5 Routing Loops
      • 4-6 Route Redistribution
      • 4-7 Static and Default Route Lab
    • Chapter 5 Routing Protocols
      • 5-1 RIPv1 & RIPv2
      • 5-2 Configuring RIPv1 & RIPv2
      • 5-3 Verifying and Troubleshooting RIP
      • 5-4 Enhanced Interior Gateway Routing Protocol (EIGRP)
      • 5-5 Configuring EIGRP
      • 5-6 Verifying and Troubleshooting EIGRP
      • 5-7 Open Shortest Path First (OSPF)
      • 5-8 Configuring OSPF
      • 5-9 Verifying and Troubleshooting OSPF
      • 5-10 EIGRP and OSPF Summary & Redistribution Routes
      • 5-11 Lab 5-1: RIP
      • 5-12 Lab 5-2: EIGRP
      • 5-13 Lab 5-3: OSPF
    • Chapter 6 Switching and Spanning Tree Protocol
      • 6-1 Understanding Switching and Switches
      • 6-2 Initial Configuration of a Catalyst Switch
      • 6-3 Spanning Tree Protocol (STP)
      • 6-4 Cisco’s additions to STP (Portfast, BPDUGuard, BPDUFilter, UplinkFast, BackboneFast)
      • 6-5 Rapid Spanning Tree Protocol (RSTP) – 802.1w
      • 6-6 Per-VLAN Spanning Tree Plus (PVST+) and Per-VLAN RSTP (Rapid-PVST)
      • 6-7 EtherChannel
      • 6-8 Lab 6-1 – Port Security
      • 6-9 Lab 6-2 – STP
    • Chapter 7 VLANs and VTP
      • 7-1 MAC Address Table
      • 7-2 Virtual LANs (VLANs)
      • 7-3 Types of Switch Ports
      • 7-4 VLAN Trunking: ISL and 802.1Q
      • 7-5 VLAN Trunking Protocol (VTP)
      • 7-6 Inter-VLAN Routing
      • 7-7 VLAN Configuration
      • 7-8 Inter-VLAN Routing Configuration
      • 7-9 VTP Troubleshooting
      • 7-10 Voice VLAN Configuration
    • Chapter 8 – Network Security
      • 8-1 Network Security
      • 8-2 Cisco Firewalls
      • 8-3 Layer 2 Security
      • 8-4 AAA Security Services
      • 8-5 Secure Device Management
      • 8-6 Secure Communications
    • Chapter 9 – Access Lists
      • 9-1 Introduction to Access Lists
      • 9-2 Standard Access Lists
      • 9-3 Extended Access Lists
      • 9-4 Access Lists -Remote Access, Switch Port, Modifying & Helpful Hints
      • 9-5 Cisco Configuration Professional Initial Setup and Access List Lab
    • Chapter 10 – Network Address Translation (NAT)
      • 10-1 Introduction to NAT
      • 10-2 Static NAT Configuration & Verification
      • 10-3 Dynamic NAT Configuration
      • 10-4 NAT Overloading aka Port Address Translation (PAT)
      • 10-5 NAT Troubleshooting
      • 10-6 NAT Configuration with Cisco Configuration Professional
    • Chapter 11 – Wide Area Networks
      • 11-1 Introduction to Wide-Area Networks
      • 11-2 Point-to-Point WANs: Layer 1
      • 11-3 Point-to-Point WANs: Layer 2
      • 11-4 PPP Concepts
      • 11-5 PPP Configuration
      • 11-6 Troubleshooting Serial Links
      • 11-7 Frame Relay
      • 11-8 LMI and Encapsulation Types
      • 11-9 Frame Relay Congestion Control
      • 11-10 Frame Relay Encapsulation
      • 11-11 Frame Relay Addressing
      • 11-12 Frame-Relay Topology Approaches
      • 11-13 Frame Relay Configuration
      • 11-14 Other WAN Technologies
    • Chapter 12 – Virtual Private Networks
      • 12-1 VPN Concepts
      • 12-2 Types of VPN
      • 12-3 Encryption
      • 12-4 IPsec VPNs
      • 12-5 SSL VPNs & Tunneling Protocols
      • 12-6 GRE Tunnels
      • 12-7 VPN Summary
    • Chapter 13 – IPv6
      • 13-1 IPv6 Introduction
      • 13-2 IPv6 Address Configuration
      • 13-3 OSPF Version 3
      • 13-4 EIGRP for IPv6
      • 13-5 Summary
    • Chapter 14 – IP Services
      • 14-1 High Availability – VRRP, HSRP, GLBP
      • 14-2 Cisco IOS NetFlow
      • 14-3 Summary
  • ICND1 100-105
  • ICND2 200-105

 

Copyright © FreeCCNAStudyGuide.com. All rights reserved.